|
We have
discontinued the T-Rex Guitar Pedals and Effects line for 2007 |
Please call for
availability of items in Stock. |
|
|
|
|
T-Rex Alberta Pedal
The Alberta has that creamy overdrive
tone reminiscent of a great sounding, vintage TS-808 unit, but is
voiced with slightly more bottom end. When the gain is turned up
towards maximum, the pedal behaves much the same as a vintage Tube
Screamer.
When a more subtle setting of the
gain control is dialed in, the result is the perfect "Blues Tone" -
adding more bite and "goosing" the midrange (with sweet tube-like
harmonics), while still keeping the tone of the player's favorite
tube amp. The Alberta delivers the goods, night after night.
T-Rex pedals are handcrafted in Denmark and offer a 2-year
unconditional warranty.
Dimensions: 4" wide, 4.75" deep, 1.5" high
List $229.00
Extreme
Price: $199.00
|
|
|
T-Rex Betavibe Pedal
The BetaVibe is an analog chorus
loaded with features. Unlike other chorus units, the BetaVibe's mix
knob allows the user to dial in a very subtle chorus, an all out
psychedelic swirl, or anything in between.
Another unique feature is the BetaVibe's ability to create a "ramp
up/ramp down" speed change. With the mode button in the down
position (and by depressing the tap tempo footswitch) the user is
able to change the modulation speed gradually from slow (preset by
T-Rex to the minimum speed) to fast (the speed setting selected by
the user). By depressing the tap tempo footswitch again, the unit
gradually changes the modulation speed from fast to slow. The result
is remarkably identical to a real leslie rotor.
With the mode button in the up
position, the user is able to change the modulation speed manually
by "tapping it in" via the tap tempo footswitch. Tap tempo, speed
and on/off functions can also be controlled externally, via the
built in midi socket.
The circuitry is entirely analog,
with the exception of some digital circuitry to accommodate the MIDI
functions. The signal however, only signal passes thru analog
circuitry. The volume control is unity gain in the 12 o'clock
position and provides up to 3 dB boost in the maximum position. The
BetaVibe is true (hot-wire) bypass and comes with a 12 volt external
power supply.
T-Rex pedals are handcrafted in Denmark and offer a 2 year
unconditional warranty.
Dimensions: 4" wide, 4.75" deep,1.5" high
List $450.00
Extreme Price: $399.00 |
|
|
T-Rex Comp Nova Pedal
The Comp Nova is T-Rex's answer for
players seeking a simple to use, 9v powered compressor unit with
clarity and dynamics (even at maximum compression levels) that will
not color their sound.
The setting of the comp control is
used to dial in the desired amount of compression. The attack
control is dual function and adjusts both the attack and threshold
(how hot the signal should be before engaging and how long before
releasing).
The volume is unity gain in the 12
o'clock position and provides up to 3 dB boost in the maximum
position. The Comp Nova - use it to smooth out and thicken your
guitar tone, while adding that much sought after "chime".
T-Rex pedals are handcrafted in Denmark and offer a 2-year
unconditional warranty.
Dimensions: 4" wide, 4.75" deep, 1.5" high
List $229.00
Extreme
Price: $199.00
|
|
|
T-Rex Mudhoney Pedal
The Mudhoney is the ultimate "fire
and brimstone" machine. With the boost function disengaged, it
provides a mild to fierce boost (depending on gain setting), with
lots of bottom, easily recreating psychadelic guitar sounds of the
’60s.
When the boost is engaged, the gain
becomes much more sensitive and is capable of unleashing the most
hairy "in your face" fuzz mania by adding a wild subharmonic beneath
the selected fuzz setting.
Unlike most other units, the Mudhoney
is able to maintain a tight bottom end, even in the most extreme
settings. The volume is unity gain in the 12 o'clock position and
provides up to 3 dB boost in the maximum position.
T-Rex pedals are handcrafted in Denmark and offer a 2 year
unconditional warranty.
Dimensions: 4" wide, 4.75" deep, 1.5" high
List $229.00
Extreme
Price: $199.00
|
|
|
T-Rex Replica Pedal
The Replica utilizes truly amazing
circuitry to create THE MOST AMAZING DELAY!! Unlike other digital
units that use a DSP chip to sample at 44.1 kHz, the Replica uses 2
Burr Brown 24 bit converters (1 Analog to Digital; 1 Digital to
Analog) to sample at an unprecedented rate of 200 kHz! In order to
maintain full dynamics, the signal is routed from the input ADC
directly into RAM, where it is manipulated (according to the unit's
settings) and then routed directly to the Output DAC.
The circuitry is entirely analog,
with the exception of the 24 bit converters and RAM. An input pad
switch can be engaged (attenuation of -10 dB) for studio use. In
addition, the Replica can be made to sound more "analog" by pressing
the "Brown" button which engages a Hi-cut filter that alters the
tone of the repeats. The result is a warmer, smoother delay
reminiscent of a 60´s era tape echo.
The Replica is true (hot-wire) bypass
and is capable of delay settings up to 2000ms. The Replica also
features a tap tempo function (which can be controlled externally,
via the built in midi socket), and a subdivision function (which
when engaged, creates triplets, based on the "tapped" quarter note
tempo). The Replica provides a direct out 1/4 inch jack and comes
with an external 12 volt power supply.
T-Rex pedals are handcrafted in Denmark and offer a 2 year
unconditional warranty.
Dimensions: 4" wide, 4.75" deep, 1.5" high
List $450.00
Extreme Price: $399.00 |
|
|
T-Rex Tremster Pedal
The Tremster has been designed to
sound like a vintage tube amp tremelo. Unlike many other tremelos
that utilize opto-electronic designs, the Tremster uses a
light-dependent resistor (LDR) to achieve it's deep, buttery,
seductive tone.
A flashing LED displays the selected
speed setting, and allows a wide range of control from very slow to
head-spinning fury. When the mode button is in the "normal"
position, the Tremster has an aggresive/more sine wave type effect
on the signal, coming down 100% in volume. When the mode button is
depressed, the Tremster has a less aggresive/more square wave type
effect on the signal, coming down only 80% in volume.
The actual volume control itself is
unity gain in the 12 o'clock position and provides up to 3 dB boost
(and more "bite") in the maximum position.
T-Rex pedals are handcrafted in Denmark and offer a 2 year
unconditional warranty.
Dimensions: 4" wide, 4.75" deep, 1.5" high
List $229.00
Extreme
Price: $199.00
|
|
|
|
The T-Rex Mac 1 Switcher
The Mac1 is a
fully programmable 19 inch rack mount unit that provides the user
with total control over effects pedals, Midi or non-Midi processors,
amp/channel switching and much more. The player can utilize 8 serial
loops (6 mono/2 stereo), A/B channel switching and a feature
previously unavailable on commonly offered switching systems: VCA
(master output volume) which can be controlled via an expression
pedal. The audio path contains only passive circuitry ensuring
transparency of tone and no signal loss. The Mac1 accepts program
changes from most MIDI foot controllers and sets the loops, line
mixers and control switches to any pre-programmed configuration.
Approximate dimensions:
17" wide x 9.5" deep x 3.5"
high
List $1275.00
Extreme
Price: $1199.00
|
|
The T-Rex Big Foot Midi Controller System
The Big Foot Midi Controller is a rugged, comprehensive, yet
simple to use Midi board. Although it is compatible any Midi
device that recognizes controller commands and patch changes, it
was designed to interface (via a standard midi cable) with the
Mac1. It allows 10 presets in each of its 12 banks, and 6
programmable CTL switches. An additional feature is the CHANGE
mode, which allows direct access to each individual loop of the
Mac1 for real time on/off switching of effects pedals.
Approximate dimensions: 20" wide x 10.5" deep x 2.5" high
List $950.00
Extreme
Price: $899.00
|
|
|
|
|
|
|
|